A-19 Atlas Belt
Design
The A-19 Atlas Belt is a padded battle belt for medium-to-heavy loads that does exactly what you need and nothing you don't. At 640 g, it carries serious kit without overcomplicating the setup. Same philosophy as a Toyota Hilux: no limits on what you can strap to it, no complaints when you do. A large MOLLE area gives you room to mount your holster, mag pouches, IFAK, and comms gear without running out of real estate. Size L runs 25 MOLLE cells.
The high lumbar section supports your lower back and keeps everything locked down when the loadout gets serious. Removable cushions handle comfort and airflow between the belt and your body. This is a straightforward, proven rig that works with the Ars Arma carrier ecosystem via telescoping struts (sold separately) right out of the gate. Built to work from day one.
Features
- Large MOLLE area — attachment surface accommodates a full battle belt loadout across sizes S through L. Supports holsters, magazine pouches, medical pouches, and dump pouches.
- High lumbar section — padded lumbar section stabilizes the belt under heavy pouch configurations.
- Internal ballistic compartment — accepts a soft armor panel for fragmentation protection around the waist. Ballistic inserts sold separately.
- Removable cushions — padding between belt and body for comfort and ventilation during extended use.
- Side inner belt access — pass-through slots on both sides accommodate holster and drop-leg panel attachment without outer belt removal.
- Back hardware for suspenders — mounting points on the rear for load-bearing harness straps or suspenders.
- Telescoping strut compatible — accepts telescoping struts (sold separately) for carrier-to-belt weight transfer. Compatible with all Ars Arma carriers for integrated system configurations.
Specifications
| Spec | Value |
|---|---|
| Weight | 640 g / 1.41 lbs |
| Primary Material | 500D Cordura |
| Ballistic Compartment | Soft armor compatible |
| Strut Interface | Compatible with telescoping struts (sold separately) |
Sizing
| Size | Waist Range | Belt Length | MOLLE Cells |
|---|---|---|---|
| S | 29–35" (74–90 cm) | 86 cm | 19 |
| M | 33–39" (84–98 cm) | 94 cm | 22 |
| L | 37–42" (93–107 cm) | 103 cm | 25 |
System Integration
The A-19 Atlas connects to the Ars Arma carrier ecosystem through telescoping struts (sold separately). Chassis carriers — A-24 Titan 2.0, AAPC MOD.3, and A-25 Beast — mount struts directly to their frames. Non-chassis carriers — A-18 Skanda and A-18 Goliath-D — require the A-22 Half Harness Insert (sold separately) as an adapter before struts can connect. All MOLLE rows accept standard pouches.
Original: $119.99
-70%$119.99
$36.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Design
The A-19 Atlas Belt is a padded battle belt for medium-to-heavy loads that does exactly what you need and nothing you don't. At 640 g, it carries serious kit without overcomplicating the setup. Same philosophy as a Toyota Hilux: no limits on what you can strap to it, no complaints when you do. A large MOLLE area gives you room to mount your holster, mag pouches, IFAK, and comms gear without running out of real estate. Size L runs 25 MOLLE cells.
The high lumbar section supports your lower back and keeps everything locked down when the loadout gets serious. Removable cushions handle comfort and airflow between the belt and your body. This is a straightforward, proven rig that works with the Ars Arma carrier ecosystem via telescoping struts (sold separately) right out of the gate. Built to work from day one.
Features
- Large MOLLE area — attachment surface accommodates a full battle belt loadout across sizes S through L. Supports holsters, magazine pouches, medical pouches, and dump pouches.
- High lumbar section — padded lumbar section stabilizes the belt under heavy pouch configurations.
- Internal ballistic compartment — accepts a soft armor panel for fragmentation protection around the waist. Ballistic inserts sold separately.
- Removable cushions — padding between belt and body for comfort and ventilation during extended use.
- Side inner belt access — pass-through slots on both sides accommodate holster and drop-leg panel attachment without outer belt removal.
- Back hardware for suspenders — mounting points on the rear for load-bearing harness straps or suspenders.
- Telescoping strut compatible — accepts telescoping struts (sold separately) for carrier-to-belt weight transfer. Compatible with all Ars Arma carriers for integrated system configurations.
Specifications
| Spec | Value |
|---|---|
| Weight | 640 g / 1.41 lbs |
| Primary Material | 500D Cordura |
| Ballistic Compartment | Soft armor compatible |
| Strut Interface | Compatible with telescoping struts (sold separately) |
Sizing
| Size | Waist Range | Belt Length | MOLLE Cells |
|---|---|---|---|
| S | 29–35" (74–90 cm) | 86 cm | 19 |
| M | 33–39" (84–98 cm) | 94 cm | 22 |
| L | 37–42" (93–107 cm) | 103 cm | 25 |
System Integration
The A-19 Atlas connects to the Ars Arma carrier ecosystem through telescoping struts (sold separately). Chassis carriers — A-24 Titan 2.0, AAPC MOD.3, and A-25 Beast — mount struts directly to their frames. Non-chassis carriers — A-18 Skanda and A-18 Goliath-D — require the A-22 Half Harness Insert (sold separately) as an adapter before struts can connect. All MOLLE rows accept standard pouches.
